Bill Commons

CA SB 314

dead

Weights and measures: electric vehicle supply equipment.

California · 2025-2026 Regular Session · upper

Follow this bill’s action updates (Atom)

Subscribe in a feed reader. The feed covers recorded actions from the last 30 days; Bill Commons may record an action after it happened at the legislature.

Quick answers

Did CA SB 314 pass?

No. CA SB 314 did not pass — it was defeated or died in the legislative process. Latest recorded action (2026-02-02): Returned to Secretary of Senate pursuant to Joint Rule 56.

What is CA SB 314 about?

Existing law provides that the Department of Food and Agriculture has general supervision of the weights and measures and weighing and measuring devices sold or used in the state, including devices used to measure electricity sold as a motor vehicle fuel. Existing law regulates the use and repair of weighing or measuring devices. Existing law authorizes a device to be placed in service only by a sealer or a service agency. Existing law prohibits, until January 1, 2028, requiring electric vehicle supply equipment (EVSE) to be retested or placed in service by a service agency or sealer, if the EVSE has previously been placed in service by a service agency or sealer, before the EVSE is used after receiving maintenance, as specified. This bill would authorize an EVSE that has been audited or tested by the manufacturer or supplier to be used commercially without further testing during the remainder of the inspection period adopted by the Secretary of Food and Agriculture, but not until it has been sealed by a sealer. The bill would, among other things, require the county sealer to ensure that certain EVSE installed before January 1, 2026, are initially placed in service and tested by a sealer on or before January 1, 2027, at no additional cost other than the registration fees paid by the EVSE owner or operator. The bill would, until January 1, 2028, if an EVSE has previously been placed in service, no longer require the EVSE to be retested or placed in service by a service agency or sealer before the EVSE is used after receiving maintenance in a manner that does not affect the EVSE being correct. The bill would require the Division of Measurement Standards, on or before January 1, 2027, to issue guidance and develop statewide resources relevant to weights and measures for EVSE, as specified, and to consider and implement optional pathways for EVSE testing and placed-in-service requirements, including in-factory auditing or testing and certification by a factory- or supplier-registered service agency.

Who sponsors CA SB 314?

Padilla is the primary sponsor of CA SB 314.

Description

Existing law provides that the Department of Food and Agriculture has general supervision of the weights and measures and weighing and measuring devices sold or used in the state, including devices used to measure electricity sold as a motor vehicle fuel. Existing law regulates the use and repair of weighing or measuring devices. Existing law authorizes a device to be placed in service only by a sealer or a service agency. Existing law prohibits, until January 1, 2028, requiring electric vehicle supply equipment (EVSE) to be retested or placed in service by a service agency or sealer, if the EVSE has previously been placed in service by a service agency or sealer, before the EVSE is used after receiving maintenance, as specified. This bill would authorize an EVSE that has been audited or tested by the manufacturer or supplier to be used commercially without further testing during the remainder of the inspection period adopted by the Secretary of Food and Agriculture, but not until it has been sealed by a sealer. The bill would, among other things, require the county sealer to ensure that certain EVSE installed before January 1, 2026, are initially placed in service and tested by a sealer on or before January 1, 2027, at no additional cost other than the registration fees paid by the EVSE owner or operator. The bill would, until January 1, 2028, if an EVSE has previously been placed in service, no longer require the EVSE to be retested or placed in service by a service agency or sealer before the EVSE is used after receiving maintenance in a manner that does not affect the EVSE being correct. The bill would require the Division of Measurement Standards, on or before January 1, 2027, to issue guidance and develop statewide resources relevant to weights and measures for EVSE, as specified, and to consider and implement optional pathways for EVSE testing and placed-in-service requirements, including in-factory auditing or testing and certification by a factory- or supplier-registered service agency.

Introduced
2025-02-10
Latest action
2026-02-02 — Returned to Secretary of Senate pursuant to Joint Rule 56.
Bill type
bill
Last updated
—

Subjects

Sponsors

  • Padillaauthor

Committees

Not provided by source.

Action timeline

Newest first

  1. 2026-02-02

    Returned to Secretary of Senate pursuant to Joint Rule 56.

    failure

  2. 2025-05-23

    May 23 hearing: Held in committee and under submission.

  3. 2025-05-16

    Set for hearing May 23.

  4. 2025-05-12

    May 12 hearing: Placed on APPR. suspense file.

  5. 2025-05-02

    Set for hearing May 12.

  6. 2025-04-28

    From committee: Do pass and re-refer to Com. on APPR. (Ayes 10. Noes 0. Page 916.) (April 28). Re-referred to Com. on APPR.

    committee-passage,committee-passage-favorable,referral-committee

  7. 2025-04-04

    Set for hearing April 28.

  8. 2025-04-03

    April 21 set for first hearing canceled at the request of author.

  9. 2025-03-18

    Set for hearing April 21.

  10. 2025-03-17

    From committee with author's amendments. Read second time and amended. Re-referred to Com. on B. P. & E.D.

    amendment-passage,committee-passage,reading-1,reading-2,referral-committee

  11. 2025-02-19

    Referred to Com. on B. P. & E.D.

    referral-committee

  12. 2025-02-11

    From printer. May be acted upon on or after March 13.

  13. 2025-02-10

    Introduced. Read first time. To Com. on RLS. for assignment. To print.

    introduction,reading-1,referral-committee

Versions

Documents

Votes

  • Do pass, but first be re-referred to the Committee on [Appropriations]

    2025-04-28 · pass · 10-0

    Member-level votes (11)
    • Grayson: yes
    • Smallwood-Cuevas: yes
    • Umberg: yes
    • Arreguín: yes
    • Weber Pierson: yes
    • Ashby: yes
    • Strickland: yes
    • Choi: yes
    • Archuleta: yes
    • Menjivar: yes
    • Niello: other

  • Placed on suspense file

    2025-05-12 · pass · 7-0

    Member-level votes (7)
    • Wahab: yes
    • Seyarto: yes
    • Grayson: yes
    • Richardson: yes
    • Cabaldon: yes
    • Dahle: yes
    • Caballero: yes

Related bills

No related bills recorded for this bill.

Official source

http://leginfo.legislature.ca.gov/faces/billNavClient.xhtml?bill_id=202520260SB314

Attribution

Data from openstates_api_sync, retrieved 2026-10-27T23:27:10.366265Z

Inspect retained evidence for changes recorded after evidence tracking began:

Source and document changesStatus and relationship changes

Session-wide evidence can include changes to other bills:

Bulk imports for this sessionSession dates and activity

Use this data

Every field on this page is available from the free public API — no key or licence required. Fetch this bill as JSON: GET /api/v1/bills?jurisdiction=CA&identifier=SB 314. See the API docs or the MCP server for AI assistants.

Known limitations

  • Sponsor party and chamber affiliation are not yet captured by this API.
  • Committee referrals are not yet captured.
  • Some documents have no extracted text yet, so version comparison may be limited.

See the methodology page for data sources and limitations.